61. Father of industrial engineering is
(a) Jeck Gilberth
(b) Gnatt
(c) Taylor
(d) Newton
(e) none of the above.
Ans: b
62. The grouping of activities into organisational units is called
(a) corporate plans
(b) higher level management
(c) functional authority
(d) departmentatidn
(e) company policy.
Ans: d
63. Which of the following organisation is preferred in automobile industry
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line and staff organisations
(e) scalar organisation.
Ans: d
64. Which of the following organisations is best suited for steel plants
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line, staff and functional organisations
(e) scalar organisation.
Ans: a
65. The wastage of material in the store is taken into account by the following method in the evaluation of the material issued from the store
(a) inflated system
(b) primary cost method
(c) current value method
(d) fixed price method
(e) variable price method.
Ans: a
66. Which of the following is independent of sales forecast
(a) productivity
(b) inventory control
(c) production planning
(d) production control
(e) capital budgeting.
Ans: a
67. Gnatt charts are used for
(a) forecasting sales
(b) production schedule
(c) scheduling and routing
(d) linear programming
(e) none of the above.
Ans: b
68. Inventory management consists of
(a) effective running of stores
(b) state of merchandise methods of stroing and maintenance etc.
(c) stock control system
(d) all of the above
(e) none of the above.
Ans: d
69. Gnatt charts provide information about
(a) break even point analysis
(b) production schedule
(c) material handling layout
(d) determining selling price
(e) value analysis.
Ans: b
70. Inventory control in production, planning and control aims at
(a) achieving optimization
(b) ensuring against market fluctuations
(c) acceptable customer service at low capital investment in inventory
(d) discounts allowed in bulk purchase
(e) regulate supply and demand.
Ans: c
71. In inventory control, the economic order quantity is the
(a) optimum lot size
(b) highest level of inventory
(c) lot corresponding to break-even point
(d) capability of a plant to produce
(e) none of the above.
Ans: a
72. Statistical quality control techniques are based on the theory of
(a) quality
(b) statistics
(c) probability
(d) all of the above
(e) none of the above.
Ans: c
73. The appellate authority for an industrial dispute is
(a) management
(b) labour court
(c) high court/supreme court
(d) board of directors
(e) president.
Ans: c
74. Under the Apprenticeship Act
(a) all industries have to necessarily train the apprentices
(b) industries have to train apprentices ac-cording to their requirement
(c) all industries employing more than 100 workers have to recruit apprentices
(d) only industries employing more than 500 workers have to recruit apprentices
(e) all industries other than small scale industries have to train apprentices.
Ans: d
75. Standing orders which are statutory are applicable to
(a) all industries
(b) all process industries and thermal power plants
(c) only major industries
(d) only key industries
(e) all industries employing more than 100 workers.
Ans: e
Read More Questions:
Production Management and Industrial Engineering MCQs Part1
Production Management and Industrial Engineering MCQs Part2
(a) Jeck Gilberth
(b) Gnatt
(c) Taylor
(d) Newton
(e) none of the above.
Ans: b
62. The grouping of activities into organisational units is called
(a) corporate plans
(b) higher level management
(c) functional authority
(d) departmentatidn
(e) company policy.
Ans: d
63. Which of the following organisation is preferred in automobile industry
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line and staff organisations
(e) scalar organisation.
Ans: d
64. Which of the following organisations is best suited for steel plants
(a) functional organisation
(b) line organisation
(c) staff organisation
(d) line, staff and functional organisations
(e) scalar organisation.
Ans: a
65. The wastage of material in the store is taken into account by the following method in the evaluation of the material issued from the store
(a) inflated system
(b) primary cost method
(c) current value method
(d) fixed price method
(e) variable price method.
Ans: a
66. Which of the following is independent of sales forecast
(a) productivity
(b) inventory control
(c) production planning
(d) production control
(e) capital budgeting.
Ans: a
67. Gnatt charts are used for
(a) forecasting sales
(b) production schedule
(c) scheduling and routing
(d) linear programming
(e) none of the above.
Ans: b
68. Inventory management consists of
(a) effective running of stores
(b) state of merchandise methods of stroing and maintenance etc.
(c) stock control system
(d) all of the above
(e) none of the above.
Ans: d
69. Gnatt charts provide information about
(a) break even point analysis
(b) production schedule
(c) material handling layout
(d) determining selling price
(e) value analysis.
Ans: b
70. Inventory control in production, planning and control aims at
(a) achieving optimization
(b) ensuring against market fluctuations
(c) acceptable customer service at low capital investment in inventory
(d) discounts allowed in bulk purchase
(e) regulate supply and demand.
Ans: c
71. In inventory control, the economic order quantity is the
(a) optimum lot size
(b) highest level of inventory
(c) lot corresponding to break-even point
(d) capability of a plant to produce
(e) none of the above.
Ans: a
72. Statistical quality control techniques are based on the theory of
(a) quality
(b) statistics
(c) probability
(d) all of the above
(e) none of the above.
Ans: c
73. The appellate authority for an industrial dispute is
(a) management
(b) labour court
(c) high court/supreme court
(d) board of directors
(e) president.
Ans: c
74. Under the Apprenticeship Act
(a) all industries have to necessarily train the apprentices
(b) industries have to train apprentices ac-cording to their requirement
(c) all industries employing more than 100 workers have to recruit apprentices
(d) only industries employing more than 500 workers have to recruit apprentices
(e) all industries other than small scale industries have to train apprentices.
Ans: d
75. Standing orders which are statutory are applicable to
(a) all industries
(b) all process industries and thermal power plants
(c) only major industries
(d) only key industries
(e) all industries employing more than 100 workers.
Ans: e
Read More Questions:
Production Management and Industrial Engineering MCQs Part1
Production Management and Industrial Engineering MCQs Part2
No comments:
Post a Comment