Tricky Airport Engineering Multiple choice Questions and Answers pdf

41. Consider the following statements: Wind rose diagram is used for the purposes of
1. runway orientation
2. estimating the runway capacity
3. geometric design of holding apron Of these statements
a) 1 and 2 are correct
b) 2 and 3 are correct
c) 1 and 3 are correct
d) 1 alone is correct
Ans: d

42. Which of the following factors are taken into account for estimating the runway length required for aircraft landing?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient
Select the correct answer using the codes given below Codes:
a) 1,2,3 and 4
b) 1,3, and 4
c) 2 and 3
d) 1,2 and 4
Ans: d

43. In an airport, if 4 groups of 5 gates each located well-separated are considered for traffic and the future to present traffic ratio is 3, then the total requirement of future gates will be
a) 32
b) 36
c) 44
d) 68
Ans: b

44. Castor angle is defined as the angle
a) formed by the longitudinal axis of the aircraft and the direction of movement of the nose gear
b) between the direction of wind and the longitudinal axis of the runway
c) between the true speed of the aircraft and the crosswind component
d) between the horizontal and the fuselage axis
Ans: a

45. The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be
a) 2845 m
b) 2910 m
c) 3030 m
d) 3130m
Ans: c

Read More Questions:
Airport Engineering Mcqs Part1
Airport Engineering Mcqs Part2

No comments:

Post a Comment