51. The units of moment of inertia of mass are
(a) kg m2
(b) m4
(c) kg/m2
(d) kg/m
(e) m2/kg.
Ans: a
52. The possible loading in various members of framed structures are
(a) compression or tension
(b) buckling or shear
(c) shear or tension
(d) all of the above
(e) bending.
Ans: a
53. A heavy string attached at two ends at same horizontal level and when central dip is very small approaches the following curve
(a) catenary
(b) parabola
(c) hyperbola
(d) elliptical
(e) circular arc.
Ans: b
54. A trolley wire weighs 1.2 kg per metre length. The ends of the wire are attached to two poles 20 metres apart. If the horizontal tension is 1500 kg find the dip in the middle of the span
(a) 2.5 cm
(b) 3.0 cm
(c) 4.0 cm
(d) 5.0 cm
(e) 2.0 cm.
Ans: c
55. From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the centre of circular plate
(a) 0.5 cm
(b) 1.0 cm
(c) 1.5 cm
(d) 2.5 cm
(e) 0.25 cm.
Ans: a
56. Which of the following is not the unit of energy
(a) kg m
(b) kcal
(c) wattr
(d) watt hours
(e) kg m x (m/sec)2.
Ans: c
57. A sample of metal weighs 219 gms in air, 180 gms in water, 120 gms in an unknown fluid. Then which is correct statement about density of metal
(a) density of metal can't be determined
(b) metal is twice as dense as water
(c) metal will float in water
(d) metal is twice as dense as unknown fluid
(e) none of the above.
Ans: a
58. Pick up the incorrect statement from the following :
(a) The C.G. of a circle is at its centre
(b) The C.G. of a triangle is at the inter¬section of its medians
(c) The C.G. of a rectangle is at the inter-section of its diagonals
(d) The C.G. of a semicircle is at a dis¬tance of r/2 from the centre
(e) The C-G. of an ellipse is at its centre.
Ans: d
59. The centre of percussion of a solid cylinder of radius r resting on a horizontal plane will be
(a) r/2
(b) 2r/3
(c) r/A
(d) 3r/2
(e) 3r/A.
Ans: d
60. The C.G. of a plane lamina will not be at its geometrical centre in the case of a
(a) right angled triangle
(b) equilateral triangle
(c) square
(d) circle
(e) rectangle.
Ans: a
Read More Questions:
Engineering Mechanics MCQs Part1
Engineering Mechanics MCQs Part2
(a) kg m2
(b) m4
(c) kg/m2
(d) kg/m
(e) m2/kg.
Ans: a
52. The possible loading in various members of framed structures are
(a) compression or tension
(b) buckling or shear
(c) shear or tension
(d) all of the above
(e) bending.
Ans: a
53. A heavy string attached at two ends at same horizontal level and when central dip is very small approaches the following curve
(a) catenary
(b) parabola
(c) hyperbola
(d) elliptical
(e) circular arc.
Ans: b
54. A trolley wire weighs 1.2 kg per metre length. The ends of the wire are attached to two poles 20 metres apart. If the horizontal tension is 1500 kg find the dip in the middle of the span
(a) 2.5 cm
(b) 3.0 cm
(c) 4.0 cm
(d) 5.0 cm
(e) 2.0 cm.
Ans: c
55. From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the centre of circular plate
(a) 0.5 cm
(b) 1.0 cm
(c) 1.5 cm
(d) 2.5 cm
(e) 0.25 cm.
Ans: a
56. Which of the following is not the unit of energy
(a) kg m
(b) kcal
(c) wattr
(d) watt hours
(e) kg m x (m/sec)2.
Ans: c
57. A sample of metal weighs 219 gms in air, 180 gms in water, 120 gms in an unknown fluid. Then which is correct statement about density of metal
(a) density of metal can't be determined
(b) metal is twice as dense as water
(c) metal will float in water
(d) metal is twice as dense as unknown fluid
(e) none of the above.
Ans: a
58. Pick up the incorrect statement from the following :
(a) The C.G. of a circle is at its centre
(b) The C.G. of a triangle is at the inter¬section of its medians
(c) The C.G. of a rectangle is at the inter-section of its diagonals
(d) The C.G. of a semicircle is at a dis¬tance of r/2 from the centre
(e) The C-G. of an ellipse is at its centre.
Ans: d
59. The centre of percussion of a solid cylinder of radius r resting on a horizontal plane will be
(a) r/2
(b) 2r/3
(c) r/A
(d) 3r/2
(e) 3r/A.
Ans: d
60. The C.G. of a plane lamina will not be at its geometrical centre in the case of a
(a) right angled triangle
(b) equilateral triangle
(c) square
(d) circle
(e) rectangle.
Ans: a
Read More Questions:
Engineering Mechanics MCQs Part1
Engineering Mechanics MCQs Part2
No comments:
Post a Comment