71. In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about
(a) 100 xlOO5 joules
(b) lxlO5 joules
(c) 10 xlO5 joules
(d) 10 xlO5 kilo joules
(e) 10xl04ki\ojoules.
Ans: c
72. The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is
(a) 29.27 kgfm/mol°K
(b) 8314kgfm/mol°K
(c) 848kgfm/mol°K
(d) 427kgfm/mol°K
(e) 735 kgfm/mol°K.
Ans: c
73. On volume basis, air contains following parts of oxygen
(a) 21
(b) 23
(c) 25
(d) 77
(e) 79.
Ans: a
74. Universal gas constant is defined as equal to product of the molecular weight of the gas and
(a) specific heat at constant pressure
(b) specific heat at constant volume
(c) ratio of two specific heats
(d) gas constant
(e) unity.
Ans: d
75. The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is
(a) 29.27 J/kmol°K
(b) 83.14J/kmol°K
(c) 848J/kmol°K
(d) All J/kmol °K
(e) 735 J/kmol °K.
Ans: b
76. For which of the following substances, the internal energy and enthalpy are the functions of temperature only
(a) any gas
(b) saturated steam
(c) water
(d) perfect gas
(e) superheated steam.
Ans: d
77. In a free expansion process
(a) work done is zero
(b) heat transfer is zero
(c) both (a) and (b) above
(d) work done is zero but heat increases
(e) work done is zero but heat decreases.
Ans: c
78. If a gas vapor is allowed to expand through a very minute aperture, then such a process is known as
(a) free expansion
(b) hyperbolic expansion
(c) adiabatic expansion
(d) parabolic expansion
(e) throttling.
Ans: e
79. The specific heat of air increases with increase in
(a) temperature
(b) pressure
(c) both pressure and temperature
(d) variation of its constituents
(e) air flow
Ans: a
80. If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called
(a) free expansion
(b) hyperbolic expansion
(c) adiabatic expansion
(d) parabolic expansion
(e) throttling.
Ans: a
81. Which of the following processes are thermodynamically reversible
(a) throttling
(b) free expansion
(c) constant volume and constant pressure
(d) hyperbolic and pV = C
(e) isothermal and adiabatic.
Ans: e
82. Which of the following processes is irreversible process
(a) isothermal
(b) adiabatic
(c) throttling
(d) all of the above
(e) none of the above.
Ans: c
83. In order that a cycle be reversible, following must be satisfied
(a) free expansion or friction resisted expansion/compression process should not be encountered
(b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same
(c) when beat is being rejected, temperature of cold source and working sub-stance should be same
(d) all of the above
(e) none of the above.
Ans: d
84. For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be
(a) zero
(b) minimum
(d) maximum
(d) infinity
(e) there is no such criterion.
Ans: a
85. Minimum work in compressor is possible when the value of adiabatic index n is equal to
(a) 0.75
(b) 1
(c) 1.27
(d) 1.35
(e) 2.
Ans: b
86. Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be
(a) 4.17m3/kgmol
(b) 400 m3/kg mol
(c) 0.15 m3/kg mol
(d) 41.7 m3/kg mol
(e) 417m3/kgmol.
Ans: a
87. A gas is compressed in a cylinder by a movable piston to a volume one-half its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be
(a) 300 Nm
(b) 300,000 Nm
(c) 30 Nm
(d) 3000 Nm
(e) 30,000 Nm.
Ans: b
88. The more effective way of increasing efficiency of Carnot engine is to
(a) increase higher temperature
(b) decrease higher temperature
(c) increase lower temperature
(d) decrease lower temperature
(e) keep lower temperature constant.
Ans: d
89. Entropy change depends on
(a) heat transfer
(b) mass transfer
(c) change of temperature
(d) thermodynamic state
(e) change of pressure and volume.
Ans: a
90. For reversible adiabatic process, change in entropy is
(a) maximum
(b) minimum
(c) zero
(d) unpredictable
(e) negative.
Ans: c
(a) 100 xlOO5 joules
(b) lxlO5 joules
(c) 10 xlO5 joules
(d) 10 xlO5 kilo joules
(e) 10xl04ki\ojoules.
Ans: c
72. The value of the product of molecular weight and the gas characteristic constant for all the gases in M.K.S. unit is
(a) 29.27 kgfm/mol°K
(b) 8314kgfm/mol°K
(c) 848kgfm/mol°K
(d) 427kgfm/mol°K
(e) 735 kgfm/mol°K.
Ans: c
73. On volume basis, air contains following parts of oxygen
(a) 21
(b) 23
(c) 25
(d) 77
(e) 79.
Ans: a
74. Universal gas constant is defined as equal to product of the molecular weight of the gas and
(a) specific heat at constant pressure
(b) specific heat at constant volume
(c) ratio of two specific heats
(d) gas constant
(e) unity.
Ans: d
75. The value of the product of molecular weight and the gas characteristic constant for all the gases in S.I. units is
(a) 29.27 J/kmol°K
(b) 83.14J/kmol°K
(c) 848J/kmol°K
(d) All J/kmol °K
(e) 735 J/kmol °K.
Ans: b
76. For which of the following substances, the internal energy and enthalpy are the functions of temperature only
(a) any gas
(b) saturated steam
(c) water
(d) perfect gas
(e) superheated steam.
Ans: d
77. In a free expansion process
(a) work done is zero
(b) heat transfer is zero
(c) both (a) and (b) above
(d) work done is zero but heat increases
(e) work done is zero but heat decreases.
Ans: c
78. If a gas vapor is allowed to expand through a very minute aperture, then such a process is known as
(a) free expansion
(b) hyperbolic expansion
(c) adiabatic expansion
(d) parabolic expansion
(e) throttling.
Ans: e
79. The specific heat of air increases with increase in
(a) temperature
(b) pressure
(c) both pressure and temperature
(d) variation of its constituents
(e) air flow
Ans: a
80. If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called
(a) free expansion
(b) hyperbolic expansion
(c) adiabatic expansion
(d) parabolic expansion
(e) throttling.
Ans: a
81. Which of the following processes are thermodynamically reversible
(a) throttling
(b) free expansion
(c) constant volume and constant pressure
(d) hyperbolic and pV = C
(e) isothermal and adiabatic.
Ans: e
82. Which of the following processes is irreversible process
(a) isothermal
(b) adiabatic
(c) throttling
(d) all of the above
(e) none of the above.
Ans: c
83. In order that a cycle be reversible, following must be satisfied
(a) free expansion or friction resisted expansion/compression process should not be encountered
(b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same
(c) when beat is being rejected, temperature of cold source and working sub-stance should be same
(d) all of the above
(e) none of the above.
Ans: d
84. For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be
(a) zero
(b) minimum
(d) maximum
(d) infinity
(e) there is no such criterion.
Ans: a
85. Minimum work in compressor is possible when the value of adiabatic index n is equal to
(a) 0.75
(b) 1
(c) 1.27
(d) 1.35
(e) 2.
Ans: b
86. Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be
(a) 4.17m3/kgmol
(b) 400 m3/kg mol
(c) 0.15 m3/kg mol
(d) 41.7 m3/kg mol
(e) 417m3/kgmol.
Ans: a
87. A gas is compressed in a cylinder by a movable piston to a volume one-half its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be
(a) 300 Nm
(b) 300,000 Nm
(c) 30 Nm
(d) 3000 Nm
(e) 30,000 Nm.
Ans: b
88. The more effective way of increasing efficiency of Carnot engine is to
(a) increase higher temperature
(b) decrease higher temperature
(c) increase lower temperature
(d) decrease lower temperature
(e) keep lower temperature constant.
Ans: d
89. Entropy change depends on
(a) heat transfer
(b) mass transfer
(c) change of temperature
(d) thermodynamic state
(e) change of pressure and volume.
Ans: a
90. For reversible adiabatic process, change in entropy is
(a) maximum
(b) minimum
(c) zero
(d) unpredictable
(e) negative.
Ans: c
No comments:
Post a Comment