1. The selection of an electric motor for any application depends on which of the following factors ?
(a) Electrical characteristics
(b) Mechanical characteristics
(c) Size and rating of motors
(d) Cost
(e) All of the above
Ans: e
2. For a particular application the type of electric-and control gear are determined by which of the following considerations ?
(a) Starting torque
(b) Conditions of environment
(c) Limitation on starting current
(d) Speed control range and its nature
(e) All of the above
Ans: e
3. Which ofthefollowingmotors is preferred for traction work ?
(a) Universal motor
(b) D.C. series motor
(c) Synchronous motor
(d) Three-phase induction motor
Ans:
4 Which of the following motors always starts on load ?
(a) Conveyor motor
(b) Floor mill motor
(c) Fan motor
(d) All of the above
Ans: d
5 is preferred for automatic drives.
(a) Squirrel cage induction motor
(b) Synchronous motors
(c) Ward-Leonard controlled D.C. motors
(d) Any of the above
Ans: c
6. When the load is above _____ a synchronous motor is found to be more economical.
(a) 2 kW
(b) 20 kW
(c) 50 kW
(d) 100 kW
Ans: d
7. The load cycle for a motor driving a power press will be
(a) variable load
(b) continuous
(c) continuous but periodical
(d) intermittent and variable load
Ans: d
8. Light duty cranes are used in which of the following ?
(a) Power houses
(b) Pumping stations
(c) Automobile workshops
(d) All of the above
Ans: d
9. While selecting an electric motor for a floor mill, which electrical characteristics will be of least significance ?
(a) Running characteristics
(b) Starting characteristics
(c) Efficiency
(d) Braking
Ans: d
10. Which of the following motors are pre-ferred for overhead travelling cranes ?
(a) Slow speed motors
(b) Continuous duty motors
(c) Short time rated motors
(d) None of the above
Ans: c
Read More Questions:
Industrial Drives MCQs Part1
Industrial Drives MCQs Part2
(a) Electrical characteristics
(b) Mechanical characteristics
(c) Size and rating of motors
(d) Cost
(e) All of the above
Ans: e
2. For a particular application the type of electric-and control gear are determined by which of the following considerations ?
(a) Starting torque
(b) Conditions of environment
(c) Limitation on starting current
(d) Speed control range and its nature
(e) All of the above
Ans: e
3. Which ofthefollowingmotors is preferred for traction work ?
(a) Universal motor
(b) D.C. series motor
(c) Synchronous motor
(d) Three-phase induction motor
Ans:
4 Which of the following motors always starts on load ?
(a) Conveyor motor
(b) Floor mill motor
(c) Fan motor
(d) All of the above
Ans: d
5 is preferred for automatic drives.
(a) Squirrel cage induction motor
(b) Synchronous motors
(c) Ward-Leonard controlled D.C. motors
(d) Any of the above
Ans: c
6. When the load is above _____ a synchronous motor is found to be more economical.
(a) 2 kW
(b) 20 kW
(c) 50 kW
(d) 100 kW
Ans: d
7. The load cycle for a motor driving a power press will be
(a) variable load
(b) continuous
(c) continuous but periodical
(d) intermittent and variable load
Ans: d
8. Light duty cranes are used in which of the following ?
(a) Power houses
(b) Pumping stations
(c) Automobile workshops
(d) All of the above
Ans: d
9. While selecting an electric motor for a floor mill, which electrical characteristics will be of least significance ?
(a) Running characteristics
(b) Starting characteristics
(c) Efficiency
(d) Braking
Ans: d
10. Which of the following motors are pre-ferred for overhead travelling cranes ?
(a) Slow speed motors
(b) Continuous duty motors
(c) Short time rated motors
(d) None of the above
Ans: c
Read More Questions:
Industrial Drives MCQs Part1
Industrial Drives MCQs Part2
No comments:
Post a Comment